Buy HCL laptops or Home PCs from Zyxware and get BSNL broadband connection for Rs. 200 with free modem
BY webmaster
10 years ago
comments comment

Buy an HCL Ezeebee home PC from Zyxware and get high speed BSNL Broadband 1GB connection just for Rs. 200 instead of Rs. 250 and get the modem for free. This offer is valid till stocks last. The free modem is available only with HCL Desktops.

Also, buy an HCL laptop from Zyxware and get BSNL Broadband 1GB connection for just Rs. 200. Free modem offer is not valid for laptops.

For the latest range of HCL Ezeebee series of Home PC's available with Zyxware, please click here. Feel free to contact us for more information.

Our address:
Zyxware Technologies
3/118, Kesavadasapuram,
Pattom P.O,
Trivandrum - 695004,
Kerala, India.

Ph: +91-471-243-7711
Mob: +91-944-606-9446


*Conditions apply. When you buy HCL home PC from Zyxware, modem is free, while you have to pay for the modem for HCL Leaptops.



on 07th March 2007 / by webmaster
The much awaited World Cup 07 has started. It is unfortunate that you have a world cup competition smack in the middle of exam season. Ever wished you could record the whole matches and view it later. Dont worry here is the simple solution. In 4 easy steps you can convert your computer into a TV and use it to watch and/or record all the world cup matches. Buy an internal TV Tuner card or an external TV Tuner Box. Be careful when you buy external tuners - not all of them support recording. Install the card in your PC/Set up the tuner box. Split your cable connection and connect one branch to your Tuner. Make sure you use balanced splitters and not just cut and splice. Schedule to record the match and turn of monitor & speakers if you dont plan to watch it live. Ensure that you dont have any of the power-saving modes on. Voila - you have your own personal recording station. If you need assistance in buying/installing/setting up the tuner/setting up connections, give us a call at 0471-4063818 or send us an email at info at zyxware dot com. We would be more than happy to help you with this. Hardware Leave a reply Your email address will not be published. Required fields are marker *

on 30th March 2007 / by webmaster
Ever since we started our pc sales and services division we have been trying to get a system with 100% linux supported hardware. One of the pieces which had been the stumbling block till now had been the internal modem. We had tried all the internal modems available in the Trivandrum local market and we had failed, ... well not all. We have found the missing link! We recently tried out the WeP (Wipro e-Peripherals) Spider 56K V.92 PCI Modem with the Conexant HSFi CX11252-412 0610y1DB chipset (PCI ID 14F1:2F30 - from running lspci from Linux). This modem is supported in Linux and it costs only around Rs. 375. Up till now we were hesitant in offering to install linux on PCs with internal modems because of the dreaded unsupported winmodem issue. No longer so. New PCs are seldom bought with an internal modem but there are quite a lot of people with PCs who still depend on dialup as their primary means of accessing the internet. So this has opened up a whole new market for us and Linux. The Conexant HSFi CX11252 driver installation is pretty straigtforward and is given below Setting up Conexant HSFi CX11252 on Linux provides drivers for modems with conexant chipsets. They provide two versions of the driver one is a fully free version and another is the paid version. The fully free version works perfectly fine but the modem speed will be limited to 14.4kbps. The paid version costs only around 19$ and those of you who can afford it should just go ahead and buy it. Linuxant is following a model that should be a good example for other driver development companies and hardware manufacturers. The driver installation has been simplified through an easy to use installation program. The installation is available at Just download the application and follow the instructions. If you are already connected to the internet through a DSL or a Cable modem connection or through your LAN then the installer will automatically detect your chipset and settings and download the required driver and install it for you. Otherwise you will have to download the driver from and set it up manually using instructions in the following page Hardware Linux Leave a reply Your email address will not be published. Required fields are marker * Cherry (not verified) access_time 26 May 2019 - 16:23 Is that true ? Are there many people who still use modems to dialup internet ? I was thinking of helping out with some limited internal modem support for NetBSD, but wasn’t sure what the user base is like. Anoop John (not verified) access_time 26 May 2019 - 16:23 Yes I have come across quite a few customers who still use dialup as the only means of accessing net. For people who just use internet to check mail, dialup is the cheapest way to go. shankar (not verified) access_time 26 May 2019 - 16:23 I have read your above article. I have the same problem. I want to use the new Bharatiya Operating System Solution (BOSS) which is linux based. My dial up modem of D-Link is not detected in linux/BOSS neither I can get a driver for linux. D-Link company have informed that they do not have any modem supporting linux. Please inform whether you can send it by post, cost and methods available for payment. regards, shankar Pagination Current page 1 Page 2 Next page Next › Last page Last » Add new comment

on 05th May 2007 / by webmaster
BSNL is one of the leading broadband providers in India. They have managed to provide blazing fast internet connections at rates affordable to an average middle class Indian. Although they provide top quality connection speeds with very little down time, their technical support leaves a lot to be desired. More so when it comes to configuring connections in Linux. They just mention Linux as "other operating systems" in their help guides. This article covers the configuration of the BSNL Dataone broadband connection over a Dare Global DB108 modem-router on Ubuntu. Although we have tested it only on Ubuntu the steps should more or less apply for other flavours of Linux as well. There are two ways of configuring a PPPOE connection - one is using the pppoeconf command and the other by configuring the router directly. The former requires you to log on an log off from your pc while the latter lets you have a full-time-up connection which lets you go online the moment you turn on your PC. We are covering only the second strategy in this tutorial. Connect the BSNL DB108 modem/router to the BSNL line and the power supply Connect the modem to the computer using an ethernet cable Power on the modem and the computer. Go to System/Administration/Network and ensure that the network card (most probably eth0) is the default connection and that it is active. In the properties dialog for eth0, change the IP address to static IP and set the IP to Set the DNS servers as,, and; Leave the other settings as default. Check if you have connectivity to the router by running 'ping' in a terminal. Open firefox and go to This will bring up the authentication dialog. Enter user-admin and password-password to log into the router administration system. Click on WAN in the left menu. In the WAN setup page identify the row with VPI/VCI value as 0/35 (probably the third row) and click on the Edit button. In the wizard that follows, select PPP over Ethernet (PPPoE) as the connection type and enter your BSNL broadband connection username(eg: anoopjohn) and password(eg: asdf123). Leave all other settings as is and save by clicking next. Reboot the router by clicking on reboot in the left menu. Test the connection by pinging some public IP address (eg: of the Also check your dns settings by pinging Verify this by trying to open in your browser. If all goes well you should be able to access internet on your system by this point. In step 6 if you dont have connectivity to the router then you have to check if your ethernet card is up by running 'ifconfig -a'. If the card is up then you should be able to ping If both card and cable are up then you should try resetting the router and see if it is working fine. Normally there shouldn't be any problem. In step 12 if there are problems accessing internet sites but are able to ping public ip addresses then check your DNS server settings in /etc/resolv.conf. This file should be of the format nameserver nameserver nameserver nameserver If you have any questions you can contact us by commenting to this article. Hardware Linux Networking Ubuntu Leave a reply Your email address will not be published. Required fields are marker * Abhi (not verified) access_time 26 May 2019 - 16:23 Hello, I am trying to connect to my D-link DI-614 wireless router to the my BSNL ADSL broadband modem DB108. My PC is currently connected to the modem via an ethernet link. Instead, I established a two-way connection in the following way: 1) Router - modem via ethernet cable. 2) PC - Router via an ethernet cable. However when I do this, my PC is not able to connect to the internet. I am wondering if anyone can help me out with this. Subhadeep (not verified) access_time 26 May 2019 - 16:23 Thankx for this i was in a real problem connecting to the net via broadband on BSNL. Thankx again man u r life saver... Pagination Current page 1 Page 2 Next page Next › Last page Last » Add new comment
Leave a reply
Your email address will not be published. Required fields are marker *

Filtered HTML

  • Web page addresses and email addresses turn into links automatically.
  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
The content of this field is kept private and will not be shown publicly.
CAPTCHA This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.